Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for mid-sized racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 45 kg (99 lbs) or less with limitations as per Category 1 of EN 16054:2012 Standard
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for larger-sized racers and therefore includes a lightweight 1-1/8 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for smaller racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 45 kg (99 lbs) or less with limitations as per Category 1 of EN 16054:2012 Standard
Box Two™ Integrated headsets feature an aluminum top cap, CNC-machined bearing cover, and split crown race with super-smooth rolling, precision 45x45 bearings.
Extruded and CNC-machined from 6061-T6 aluminum, Box Two™ Stem Spacer Kits feature a lightweight design. Weights range from 0.24 to 0.29 ounces (6.7 to 8.2 grams), depending on the size. Sold in packs of five, each set provides spacing adjustments from 1 to 20 millimeters.
1 1/8" size
Sizes 3mm, 5mm, 8mm, 10mm, 20mm
DESIGNED FOR PERFORMANCE!
Over two years of R&D has gone into these performance driven grips. Innovative design and packed with unique features, such as Carbon Fiber reinforced ends, and made from our proprietary grip material, the CF Lock-On grips are made to perform at the highest level.
PRODUCT FEATURES:
This stem is made in NZ from locally sourced aluminium, 3d CNC machined and polished or anodised and then laser etched.
Special clamp system has the handlebar supertight, the rear faceplate bolts are fully tightened first and then the front, so there will only be a gap at the front of the faceplate, this ensures that there will be a maximum surface clamping for great even clamping.
The steerer bore is also dimensionally accurate and is firm to slide on, again this is to make sure there is maximum even clamping
This stem is made in NZ from locally sourced aluminium, 3d CNC machined and polished or anodised and then laser etched.
Comes with stainless steel bolts.
Special clamp system has the handlebar supertight, the rear faceplate bolts are fully tightened first and then the front, so there will only be a gap at the front of the faceplate, this ensures that there will be a maximum surface clamping for great even clamping.
The steerer bore is also dimensionally accurate and is firm to slide on, again this is to make sure there is maximum even clamping.
This stem is made in NZ from locally sourced aluminium, 3d CNC machined and polished or anodised and then laser etched.
Comes with stainless steel bolts.
Special clamp system has the handlebar supertight, the rear faceplate bolts are fully tightened first and then the front, so there will only be a gap at the front of the faceplate, this ensures that there will be a maximum surface clamping for great even clamping.
The steerer bore is also dimensionally accurate and is firm to slide on, again this is to make sure there is maximum even clamping.
This stem is made in NZ from locally sourced aluminium, 3d CNC machined and polished or anodised and then laser etched.
Comes with stainless steel bolts.
Special clamp system has the handlebar supertight, the rear faceplate bolts are fully tightened first and then the front, so there will only be a gap at the front of the faceplate, this ensures that there will be a maximum surface clamping for great even clamping.
The steerer bore is also dimensionally accurate and is firm to slide on, again this is to make sure there is maximum even clamping.
This stem is made in NZ from locally sourced aluminium, 3d CNC machined and polished or anodised and then laser etched.
Comes with stainless steel bolts.
Special clamp system has the handlebar supertight, the rear faceplate bolts are fully tightened first and then the front, so there will only be a gap at the front of the faceplate, this ensures that there will be a maximum surface clamping for great even clamping.
The steerer bore is also dimensionally accurate and is firm to slide on, again this is to make sure there is maximum even clamping
This stem is made in NZ from locally sourced aluminium, 3d CNC machined and polished or anodised and then laser etched.
Comes with stainless steel bolts.
Special clamp system has the handlebar supertight, the rear faceplate bolts are fully tightened first and then the front, so there will only be a gap at the front of the faceplate, this ensures that there will be a maximum surface clamping for great even clamping.
The steerer bore is also dimensionally accurate and is firm to slide on, again this is to make sure there is maximum even clamping.
The Neco Sealed Bearing Integrated Headsets use a 45/45 Sealed Angular Contact bearing for the smoothest spin, and have double rubber seals to keep the bearings clean, along with a light weight aluminium top cap. The Neco Integrated Headset is for 1” forks and will fit all Campy-Compatible head tubes. Stock colour is Black
The Neco Sealed Bearing Integrated Headsets use a 45/45 Sealed Angular Contact bearing for the smoothest spin, and have double rubber seals to keep the bearings clean, along with a light weight aluminium top cap. The Neco Integrated Headset is for 1" forks and will fit all Campy-Compatible head tubes. Stock colour is Black